Completion of oil wells and liquidation of breakdowns
Completing oil wells requires not only a set of technological tools, but also a commitment to perfect execution, ensuring confidence in your achievements. We offer solutions for every scenario, including technically challenging environments that require integrated systems and project management. Without being limited to these, these services include:
1-Completion of oil wells through multilateral systems
EDG provides multilateral completion systems services that allow drilling and completion of multiple side wells within a single main opening. This enables alternative well construction strategies for vertical, sloping, horizontal wells as well as for those with extended extensions.
2-Permanent measurement of the opening (pit)
We enable permanent pit monitoring systems that provide data on pressure, temperature and vibration in well environments. This data is commonly used to measure production performance and reservoir characteristics. They also help to control and optimize production rates with submersible pumping systems as well as to control other artificial lifting technologies.
In conventional drilling, when the pumps stop in a very narrow drilling window, the bottom area pressure drops to a value below the pore pressure and consequently can cause inflow. Once the pumps return to drilling speed again, friction brings the bottom zone pressure to a level where the rock breaking pressure is exceeded, resulting in losses.
The only option during conventional drilling is drilling at a reduced pump speed. Reduced pump speed, although temporarily controlling the problem, slows down the drilling process. This comes as a result of the need to control the penetration rate to thus reduce the risk of the well being loaded with fractions, delaying the completion of the well and increasing the risk of the pipe becoming clogged.
3-Completion of oil wells by means of intelligent systems
EDG offers intelligent completion technologies which help our customers optimize production without costly well interventions. These systems are reliable and purposeful. They enable the provision, transmission and analysis of pit data. Through this system, operators can remotely control selected reservoir areas and maximize reservoir efficiency by:
We enable permanent pit monitoring systems that provide data on pressure, temperature and vibration in well environments. This data is commonly used to measure production performance and reservoir characteristics. They also help to control and optimize production rates with submersible pumping systems as well as to control other artificial lifting technologies.
Gaining output from different reservoir areas increases and accelerates output.
Selective control in areas enables effective management of: water injection, gas and water penetration and area productivity.
The ability to produce from multiple reservoirs through a single well reduces the number of wells, thus reducing the costs of drilling and finishing them. The complexity of the process for treating the required surface is facilitated by water administration through remote zonal control.
Remote configuration of wells optimizes production without costly interference. Furthermore, generating output from different reservoir areas shortens field life, thus reducing operating costs.
4- Completion of oil wells by means of linear chain systems
EDG works with a portfolio of (well) finishing (well) design systems, tools and accessories that enable the ideal completion of open pits. This way you will save time and money, unlike what is expected to happen with traditional cemented wells. Includes linear hangers, linear packaging equipment, tools and accessories, surface cementing equipment and packaging equipment for exterior framing.
Linear link systems will enable you to reduce capital costs and minimize risks over a wide range of processes. Strategically used, these technologies result in measurable reductions in overall well construction costs. They also improve well performance.
5-Isolation valves
Remote configuration of wells enables production without costly interventions. Moreover, gaining output from different reservoir areas shortens the stay on the ground, thus reducing operating costs.
6-Safety valve
Even if located below the surface, safety valves are an integral part of well completions. They protect installations against uncontrolled leakage from production wells in the event of catastrophic damage to well equipment. EDG offers a variety of valve variants, from the basic ones to the more advanced models.
7-Sand control services for both open and insulated pits
EDG has access to gravel packaging technologies which help prevent erosion and increase packaging efficiency. The variety of fluids allows treatments to be adapted to specific well processes and conditions, while improving sand control operations.
We have access control devices, which help prevent early penetration of water and gas into your well. Can be combined with screens as an alternative solution to prevent sand ingress and maximize the efficiency and longevity of well completion.
Sand consolidation is a key factor in extending well productivity and preventing screen damage. EDG owns technology that blocks sand formations and formation fines. This maximizes sand-free flow rates, increasing production and improving sand management.
8-Completing accessories
EDG offers a wide range of tubular finishing accessories to modify your well finish and mitigate risks over its productivity. These accessories solve issues related to pipe movement, stair climbing, corrosion, erosion, selective production, zonal insulation, intelligent finishes and more.
9-Fluids and completion systems
EDG offers an integrated set of completion technologies that includes value-added finishing fluids, reservoir fluids, additives, cleaning agents and filtration engineering services. These technologies accelerate and maximize production. Together, they provide you with cost-effective way to optimize productivity during drilling, labor and finishing processes.
Our company owns a wide range of weapon systems, security systems and advanced techniques to maximize tank penetration and operational efficiency. These various offers offer operator-centric solutions that operate on any type of rock, ensuring maximum reservoir productivity in new or existing wells.
11- Stimulation of the well
Well stimulation is an intervention performed to increase production by improving the flow of hydrocarbons from the drainage area to the well pit. EDG provides hydraulic fracture and matrix stimulation services to restore or increase well productivity in all types of formations and reservoir environments.
12-Wellhead systems
EDG offers wellhead systems ranging from conventional to specific application systems for geothermal wells, rings, unconventional tools, etc.
13-Filtering
EDG is committed to providing customers with oil filtration equipment and services to ensure a clean well, with the least amount of waste, fluid residues during drilling and solids that can adversely affect productivity of the well. Our filtering services allow our clients to perform all work processes more efficiently and effectively.